ציפוי רשת ללא דבק להחשכת החלון באופן חלקי. מגן על החלון קל להתקנה.

One way vision,From the strong side of the light can not see the weak side of the light.

Self-adhesive,easy to install and remove, no colloidal residue.

.Remember to closely follow the installation manual and use lots of soapy water to prevent the film from sticking everywhere.
.Make sure window surface is completely clean and absolutely free of any blemishes.
.MORE SOAPY WATER WHEN INSTALLATION – Remember to closely follow the installation manual and use lots of soapy water to prevent the film from sticking everywhere.

Installation Instructions of LUCKYYJ Window Privacy Film Frosted Home Office Film Self-adhesive Window Stickers Glass Film:

Step 1. Keep Window or Glass Clean

Step 2. Measure the window and determine size

Step 3. If you need to cut,draw lines the window film with markers. Make sure the edge of the protective film and the glass surface have a 1cm gap.

Step 4. Wet the Window or Glass with water( the more flowing water, the better)

Step 5. Remove the Static Film from backing protect sheet ( Please MAKE SURE you have removed it before you apply the matte window film to glass), if it is difficult to tear off the protective film, you can try to tape the two sides with duct tape and then peel off.

Step 6. Squeegee away air bubbles and redundant water with a scraper or hard card (Don't move it again for 24 hours)

Step 7. Much easier than Wall Decals, 2 people work together more efficiently.

Step 8. Enjoy your works! If you want to remove it, simply peel the window film from any corner. It comes off leaving no residue cleanly.